![]() Tools needed (from left) : wrench, screwdriver, power drill, mallet, hammer, wood glue |
![]() Hard ware (from left): secure wood brace, wood dowels, cam lock, pin for cam lock, 2" screws, 1' black screws, small screws |
![]() Check all the boards: (from left) 2 horizontal boards, 2 toe kick boards, 20 shelf boards, 2 side boards, 4 middle vertical shelf boards, 1 backboard (back) |
![]() drop wood glue in the holes for wood dowels on the end of middle vertical shelf boards (25 tray has 4 slots in the middle of the vertical boards) |
![]() lay the top horizontal shelf board upside down (25 tray has 4 slots in the middle of the vertical boards) Warning: never hammer wood dowels directly on horizontal shelf boards, to avoid damaging the board from other side. |
![]() do the same on the other side of the boards (25 tray has 4 slots in the middle of the vertical boards) |
![]() put glue and wood dowels on the toe kick boards |
![]() choose the top horizontal shelf board, which is the one with no holes on one side
Warning: never hammer wood dowels directly on horizontal shelf board, to avoid damaging the board from other side. |
![]() lay the top horizontal shelf board on a table of solid surface, with the slots side up. make sure the slot for the back board is in the back. install pins with screw driver |
![]() put the glue in the middle holes |
![]() install the vertical middle shelf boards gently by hand, make sure the smooth size is facing outside |
![]() secure the boards with cam locks and make sure the arrow on the cam lock is downward. fasten the cam lock with screwdriver |
![]() same on the other side |
![]() glue the holes in the middle rows of the bottom horizontal boards |
![]() install the board on top of the vertical middle shelf boards |
![]() gently hammer the board in with mallet or band |
![]() fasten the board with 2" screws |
![]() or a wrench |
![]() install the toe kick boards and make sure the logo is in front of the furniture. make sure to use glue for the boles |
![]() slide the installed furniture on the floor slowly |
![]() turn the furniture side way (25 tray has 4 slots in the middle of the vertical boards) |
![]() glue the holes for wood dowels |
![]() hammer the wood dowels all the way in |
![]() put the glue in the holes on both side boards |
![]() choose one of the side board that match the slot for the backboard. pound the board in gently with hand or mallet |
![]() fasten the board with 2" screws |
![]() insert the shelf boards in by pushing into the slots with hand. make sure the smooth side of the boards facing outside |
![]() (25 tray has 4 slots in the middle of the vertical boards) |
![]() insert the shelf boards from back and make sure the rough side is facing back |
![]() rotate the furniture to the other side (25 tray has 4 slots in the middle for the shelf boards) |
![]() insert the backboard (25 tray has 4 slots in the middle for the shelf boards) |
![]()
|
![]() |
![]() glue the holes for wood dowels
|
![]() hammer the wood dowels all the way in |
![]() fasten the board with 2" screws |
![]() insert the shelf boards in by pushing into the slots with hand. make sure the smooth side of the boards facing outside |
![]() do the side first |
![]() do the center last |
![]() turn the furniture in the normal way (25 tray has 4 slots in the middle for the shelf boards) |
![]() for extra sturdiness, install the wood blocks in the middle of the against the Vertical side boards (25 tray has 4 slots in the middle for the shelf boards) |
![]() use glue and the 1' black screws to secure the block in the middle of the vertical side board |
![]() on the other side |
![]() make a mark in the middle from back side near the Vertical side board (make sure lineup with the wood block at the front side) |
![]() install a small screw near the edge of the sideboard, make sure it is screwed on the block on the other side |
![]() secure the backboard with small screws |
You may purchase the plastic trays at building supply or general stores, such as Home Depot, Lowe's, or Walmart, etc. |
|