use wood glue for all wood dowels and holes of all vertical boards |
Warning: Make sure to hammer the wood dowels all the way into the vertical boards, (leaving about 3/8” out), to avoid damaging the horizontal shelf boards.
Learningground is not liable if the installer misses this step. |
make sure do it on both ends |
install wood dowels on all vertical boards |
lay the top horizontal shelf board upside down
Warning: never hammer wood dowels directly on horizontal shelf boards, to avoid damaging the board from other side. |
put glue in holes for wood dowels |
install pins |
fasten pins with screwdriver |
install top vertical boards gently by hand |
put cams in for the cam locks |
make sure the back side line up with the slot for backboard |
lock the cam lock with screwdriver |
put glue in holes for wood dowels on the second boards |
install the second boards |
make sure the slots for backboards on the same side |
secure the board with 2" screws |
use the hand drill |
or wrench |
put glue in holes for wood dowels |
install pins |
fasten pins with screwdriver |
install middle vertical boards |
secure board with cam locks |
make sure the backside is lined up with the slot for backboard |
put glue in the holes of the third board |
install the board |
secure the board with 2" screws |
fasten the screws |
put glue in the holes for wood dowels |
install pins |
install bottom vertical boards |
fasten boards with cam locks |
put glue in the holes of the bottom board |
install the bottom board |
fasten the board with 2" screws |
put the glue on the holes for toe kick boards |
install wood dowels on the toe kick boards |
install the toe kick boards and make sure the logo is in front of the furniture |
turn the furniture side way |
put glue in the holes on the boards |
insert wood dowels and hammer them in |
|
install the side board |
put the glue on the holes for toe kick boards |
fasten the board with 2" screws |
turn the furniture to the other side |
install backboard |
|
install middle backboards |
|
|
|
insert wood dowels and hammer them in |
put glue in the holes on the other side board |
fasten the board with 2" screws |
install the strips to cover the gapes of backboard in the middle |
secure the backboard with small screws |
finished look
|
install the coat hooks. (Coat hooks are not included.)
|
You may purchase the coat hooks at building supply or hardware stores, such as Home Depot, Lowe's, or ACE, etc.
You may also purchase them online for a better price. Here are recommended links:
30 Pieces Double and Single Bronze Prong Hooks with 60 Pieces Screws
20 Pieces Double Prong Robe Hook Rustic Hooks Retro Cloth Hanger with 40 Pieces Screws, Bronze Color
|