![]() Tools recommended for installing the Locker: (from left) Wrench, Screwdriver, Hand Drill, Mallet, Hammer, Wood Glue |
![]() Hardware included in the package: (from left) Wrench-(1), 2" Screws-(40), Small Screws-(16), Wood Dowels-(56), Pin-(24), Can Locks-(24) |
![]()
Unpack and identify all the boards from the package (from left):
(click the picture to see larger image) |
![]() Detail: The Top Shelf Board(TSB) is a narrow board with no holes and slot on one side. (click the picture to see larger image) |
![]() Detail: The Mid Shelf Board(MSB) is a narrow board with holes and slots on both sides. (click the picture to see larger image) |
![]() Detail: The Mid Bench Board(MSB) is a wider board with holes and slots on both sides. (click the picture to see larger image) |
![]() Detail: The Bottom Shelf Board(BSB) is a wider board with holes on both sides, but slot on one side. (click the picture to see larger image) |
![]() The Left and Right Side Boards(SBL&R). (click the picture to see larger image) |
![]() Top Shelf Vertical Boards (TVB)-(4), Bottom Shelf Vertical Boards (BVB)-(4), Middle Shelf Vertical Boards (MVB)-(4) |
![]() (click the picture to see larger image) |
Backboards:
|
|
![]() use wood glue for all wood dowels and holes of all vertical boards |
![]() Warning: Make sure to hammer the wood dowels all the way into the vertical boards, (leaving about 3/8” out), to avoid damaging the horizontal shelf boards.
Learningground is not liable if the installer misses this step. |
![]() make sure do it on both ends |
![]() install wood dowels on all vertical boards
Top Vertical Boards (TVB)-(4), Bottom Vertical Boards (BVB)-(4), Middle Vertical Boards (MVB)-(4) |
![]() lay the Top Shelf Board(TSB) upside down (with the side of holes up)
Warning: never hammer wood dowels directly on horizontal shelf boards, to avoid damaging the board from other side. |
![]() drop glue in holes for wood dowels |
![]() install pins |
![]() fasten pins with screwdriver |
![]() install Top Vertical Boards (TVB)-(4) gently by hand |
![]() put cams in for the cam locks |
![]() make sure the back side line up with the slot for backboard |
![]() lock the cam lock with screwdriver |
![]() put glue in holes for wood dowels on the Mid Shelf Board(MSB) |
![]() install the Mid Shelf Board(MSB) |
![]() make sure the slots for backboards on the same side |
![]() secure the board with 2" screws |
![]() use the hand drill |
![]() or wrench |
![]() put glue in holes for wood dowels on the Mid Shelf Board(MSB) |
![]() install pins on the Mid Shelf Board(MSB) |
![]() fasten pins with screwdriver |
![]() install Middle Vertical Boards (MVB)-(4) |
![]() secure board with cam locks |
![]() make sure the backside is lined up with the slot for backboard |
![]() put glue in the holes of the Mid Bench Board(MSB) |
![]() install the Mid Bench Board(MSB) |
![]() secure the Mid Bench Board(MSB) with 2" screws |
![]() fasten the screws |
![]() put glue in the holes for wood dowels on the other side of the Mid Bench Board(MSB) |
![]() install pins |
![]() install the Bottom Vertical Boards (BVB)-(4) |
![]() fasten the boards with cam locks |
![]() put glue in the holes of the The Bottom Shelf Board(BSB) |
![]() install the The Bottom Shelf Board(BSB) |
![]() fasten the board with 2" screws |
![]() put the glue on the holes for toe kick boards |
![]() install wood dowels on Toe Kick Boards (TK1-with logo), (TK2 without logo) |
![]() install the Toe Kick Boards and make sure the logo is in front of the furniture |
![]() turn the furniture side way |
![]() put glue in the holes on ends of the boards |
![]() insert wood dowels and hammer them in |
![]()
|
![]() drop the glue in the holes for wood dowels on the The Left Side Board(SB-L) |
![]() install the The Left Side Board(SB-L) |
![]() fasten the board with 2" screws |
![]() turn the furniture to the other side |
![]() install the Top Shelf Backboard (TBB) |
![]() install the Bottom Shelf Backboard (BBB) |
![]() install one of the Middle Shelf Backboards (MBB) |
![]() install the Middle Shelf Center Backboard (MCBB) |
![]() install the other Middle Shelf Backboard (MBB) |
![]() drop glue in the holes at the end of the shelf boards |
![]() insert wood dowels and hammer them in |
![]() put glue in the holes on the The Right Side Board(SB-R) |
![]() fasten the board with 2" screws |
![]() install the Middle Shelf Strips (MS)-(2) to cover the gapes of backboards, with small screws |
![]() secure the backboards with small screws |
![]() finished look
|
![]() install the coat hooks. (Coat hooks are not included.)
|
You may purchase the coat hooks at any building supply or hardware stores, such as Home Depot, Lowe's, or ACE, etc.
You may also purchase them online for a better price. Here are recommended links:
30 Pieces Double and Single Bronze Prong Hooks with 60 Pieces Screws
20 Pieces Double Prong Robe Hook Rustic Hooks Retro Cloth Hanger with 40 Pieces Screws, Bronze Color
|